By Bruno / Last Updated On: January 28, 2024
Table of Contents
Green Mountain Grills (GMG) are a popular choice among BBQ enthusiasts for their convenience and wood-fired flavor. However, like any grill, they can experience technical difficulties.
One common issue users may encounter is the auger not turning. This problem can prevent the grill from feeding pellets into the firebox, disrupting your cooking process.
In this blog post I will be sharing some of the causes of Green Mountain Grill Auger not turning and how to fix it.
Let’s get started, shall we?
What Causes Green Mountain Grill Auger Not Turning?
#1. Pellet Jam
One of the most frequent causes of an auger not turning in a Green Mountain Grill is a pellet jam. The auger is responsible for moving pellets from the hopper into the firebox where they can be ignited.
If pellets become stuck or jammed in the auger tube, this can prevent the auger from turning. Pellet jams can occur if the grill is left outside in the weather, causing the pellets to swell and stick together.
#2. Auger Motor Issues
Another potential cause is a problem with the auger motor itself. If the motor is faulty or has burned out, it will not be able to turn the auger. This could be due to a manufacturing defect or wear and tear over time. If you suspect the motor is the issue, it may be necessary to replace it.
#3. Power Supply Problems
The auger motor requires electricity to operate. If there is an issue with the grill’s power supply, this could prevent the auger from turning.
This could be due to a tripped breaker, a blown fuse, or a problem with the power outlet.
#4. Control Board Malfunctions
The control board is the brain of the grill, regulating power to the auger motor and other components. If there is a malfunction with the control board, it may not send the correct signals to the auger motor, leading to operational issues.
#5. Mechanical Failures
Occasionally, the auger itself might be physically obstructed by debris or damage to the auger blade. This can occur if foreign objects find their way into the hopper or if the auger has been damaged through misuse or an accident.
#6. Ash Buildup
Over time, ash can accumulate in the firebox and around the auger mechanism. This buildup can obstruct the movement of the auger, preventing it from turning efficiently.
#7. Incorrect Assembly or Wear and Tear
If the grill has been recently assembled or disassembled for cleaning, it’s possible that the auger was not reassembled correctly.
This could lead to misalignment, which might hinder the auger’s movement. Additionally, over time, the components of the auger system can wear down, leading to reduced performance or failure.
#8. Temperature Swings
Extreme temperature swings can also affect the operation of your pellet grill. If the grill has been exposed to very cold temperatures, the grease or other components may have thickened or solidified, making it difficult for the auger to turn.
Conversely, very high temperatures can cause expansion of metal parts, potentially leading to jams or mechanical issues.
#9. Firmware Glitches
Sometimes, the firmware that controls the grill’s operations can have glitches or require updates. If the firmware is not functioning correctly, it might not be sending the right commands to the auger motor.
#10. Sensor Malfunctions
Green Mountain Grills are equipped with various sensors that monitor the grill’s performance. If a sensor is malfunctioning, it could incorrectly report that there is a problem, causing the control board to stop the auger from turning as a safety precaution.
Green Mountain Grill Auger Not Turning (7 Quick Fixes That Work Every Time)
#1. Tap the Auger Tube
Sometimes, a simple solution is all it takes. If your auger is stuck, the pellets inside the tube might be creating a blockage. Gently tapping the auger tube can dislodge the pellets and get things moving again.
Be cautious not to hit too hard, as you don’t want to damage the grill.
This method is a quick and easy first step to alleviate an auger jam, as demonstrated in this helpfulvideo by Green Mountain Grills.
#2. Cycle the Grill
Turning the grill into cycle “0” (the first stage of the normal start-up procedure) and simultaneously tapping the auger tube with a mallet or small hammer can also help.
This process can jog the auger loose and is recommended byGreen Mountain Grills for the Jim Bowie model.
#3. Clear the Firebox
If the auger isn’t turning, the pellets may be jammed around the auger’s intake. Turn off the grill, and carefully move the pellets around in the firebox.
After adjusting the pellets, try turning on the grill again to see if the auger begins to move. This solution is suggested for generalGreen Mountain Grill troubleshooting.
#4. Dismantle and Clean
If tapping and cycling do not work, you might need to dismantle the auger to clear a severe jam. This involves unwinding and removing the auger to get rid of the pellet mass causing the jam.
While this is more time-consuming, it can be a necessary step to get your grill working properly again.
#5. Check the Motor and Connections
Sometimes, the issue may not be with the auger itself but with the motor or electrical connections that power it. Ensure that the motor is getting power by checking the connections.
Loose or corroded wires can prevent the motor from functioning. If the motor is not making any noise when you try to start the grill, this could indicate an electrical issue.
Make sure all connections are secure and clean any corrosion with a wire brush or contact cleaner.
#6. Inspect the Auger Motor
If the connections are fine, but the auger still won’t turn, the motor might be the problem. Listen for a humming sound from the motor; if it’s silent, the motor may need to be replaced.
You can find replacement motors on the Green Mountain Grills website or from authorized dealers. When replacing the motor, always make sure to follow the manufacturer’s instructions or consult with a professional if you’re unsure.
#7. Reset the Grill’s Controller
A less common but possible cause for an auger not turning is a glitch in the grill’s control system. A simple reset can sometimes clear these issues.
To reset the controller, turn off the grill and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on.
This can sometimes reboot the system and resolve any software-related issues that may be affecting the auger’s operation.
#8. Contact Support
If none of the above fixes work, it may be time to reach out to Green Mountain Grills’ customer support. They can offer troubleshooting advice specific to your model and situation. It’s possible that your grill may still be under warranty, and if a part needs to be replaced, they can guide you through the process or send a technician to help.
Preventive Measures
To prevent future auger jams, it’s essential to follow a few maintenance tips:
- Use high-quality pellets that are less likely to cause jams due to their uniform size and low dust content.
- Store your pellets in a dry place to prevent them from swelling and getting stuck in the auger.
- Clean your grill regularly, including the auger tube, to ensure there’s no buildup of pellet dust and debris.
- Schedule Regular Maintenance
- Upgrade Firmware
Conclusion
An auger that won’t turn can be frustrating, but with these quick fixes, you can often solve the problem yourself and get back to grilling.
The key to smooth operation is regular maintenance, proper storage of pellets, and being proactive about any signs of trouble.
If you’ve tried all the solutions and your Green Mountain Grill auger is still not turning, don’t hesitate to contact professional support for further assistance.
FAQs
1. What could be the reason my Green Mountain Grill’s auger isn’t turning?
There could be multiple causes. First, make sure your grill is properly powered. If it is, it might be an issue with the auger itself or the motor, which could require professional servicing.
2. Can I replace the auger on my Green Mountain Grill?
Yes, the auger is replaceable, but you may want to consult the grill’s manual or website for the specific model’s instructions. If you’re unsure, it’s always best to seek help from a professional.
3. Is the motor the first thing I should check if the auger isn’t turning?
It is a good place to start. Ensure the motor is getting power and check if it’s making any unusual sounds that could indicate damage.
4. How often does the auger need maintenance?
Maintenance intervals will vary, but generally speaking, regular cleaning of the auger and motor area is advisable. Check your grill’s manual for specific guidelines.
5. Can I clean or lubricate the auger and motor myself?
You can clean them with a grill brush and vacuum, but lubrication should be done with care and the right product to avoid any contamination of your grill’s interior.
6. What type of cleaning routine should I establish to avoid auger issues?
Regular vacuuming and occasional removal of the auger for deep cleaning in less frequented areas should become part of your maintenance routine.
7. Could the pellet type I’m using impact the auger’s performance?
It’s possible. Low-quality or oddly shaped pellets can disrupt the flow, potentially leading to an issue with the auger. Stick to high-quality, grill-approved pellets.
8. If the tray is full, could that stop the auger from turning?
It’s uncommon, but an overly full tray can cause the motor to struggle and may result in the auger issue. Always keep the pellet tray at the recommended level.
9. How can I tell if the auger or motor is damaged?
If the auger isn’t visibly jammed, but the motor whirs without turning the auger, the motor may be the issue. If the auger has physical damage, such as warped or bent parts, you may need to replace it.
10. What’s the average lifespan of a Green Mountain Grill’s auger and motor?
Lifespans vary, but properly maintained components can last several years. However, if they’re overworked or accumulate heavy use without proper care, they may need replacement sooner.
